Culture · Crafts and material culture

Clay and Terracotta in Tamil Nadu

A pot, a lamp and a tall horse share a material, but they ask different things of the maker. Preparation, construction and firing connect the finished object to its working landscape.

My Tamil Nadu Editorial Desk
Regional casesArcot, Konthagai and Kanyakumari
ObjectsVessels, lamps, figures and votive horses
EvidenceWorkshop studies, fieldwork and dated records

An introduction

Clay work begins well before an object has a recognisable shape. Selecting and preparing a workable body, judging moisture, arranging space for drying and deciding how to fire a batch all belong to the craft. The spectacular horse and the ordinary vessel should therefore be considered together. Their differences in scale and purpose are revealing, but neither is explained adequately by calling it a souvenir or an example of “ancient art”. A useful account needs the hands that shaped it, the processes that strengthened it and the people who commissioned or used it.

This guide follows documented regional examples rather than proposing a single Tamil Nadu pottery method. Arcot offers a close account of vessel-making; Konthagai supplies fieldwork on horse production and livelihood; Kanyakumari shows mould-assisted production and training. Objects associated with Ayyanar are discussed as material culture within particular community practices. They are not instructions for worship, and they should not be removed from that setting merely because their shapes attract collectors. Historical drawings and archaeological studies enter the story where they can establish something specific: a dated observation, an analysed fabric or a question about provenance.

Arcot: making the body of a vessel

NID’s Arcot study describes cleaning clay from riverine and alluvial sources, removing unwanted particles, mixing in sand and kneading the prepared body. Keeping it covered preserves working moisture. On the wheel, the potter raises and opens the clay, then separates the formed vessel with thread. The wheel does not finish every surface: pots and bowls are subsequently thinned with a wooden bat working against a mushroom-shaped stone held inside. This paired action is easy to overlook in an account centred only on spinning clay. After drying, the documented firing arrangement uses coconut husk, hay and a mud covering in an open space. The sequence joins preparation, rotational shaping and further handwork. It is a local process record, useful precisely because it shows how a vessel passes through more than one method before firing.[1]

Kanyakumari: moulds and repeated forms

A different NID resource, on Kanyakumari pottery, describes jiggering: clay is shaped in a revolving plaster mould while a profile carried on an arm forms the other surface. Once the piece has stiffened sufficiently, it can be released, trimmed and dried. Mould design matters because the shape must be removable; the study distinguishes one-piece and two-piece arrangements. Its wider documentation includes women making decorative clay objects in a training setting associated with the Centre for Social Development. This is a useful correction to the assumption that every handmade pot must be thrown freehand. Preparing the clay, setting up the mould, judging release and finishing the edge still require decisions. Repetition is a production aim here, while the method and division of work differ from the Arcot example.[2]

Konthagai: a horse is built for its journey

S. Udayakumar’s field study of Konthagai in Sivagangai district records hollow terracotta horses made for local temple contexts. It follows drying, open firing, cooling, inspection, painting and transport. Head and body sections are brought together at the destination; the account notes contemporary use of cement and wire for joining. The study also reports only two families practising the documented method at the time of fieldwork, and describes other work, including agriculture, coconut-farm labour and brick-kiln employment. These findings are about the community studied, not a count of all Tamil Nadu horse makers. They connect construction to livelihood: the completed figure has to survive movement, and festival commissions form part of a larger working year. Its presence near the Keezhadi archaeological landscape does not by itself establish an uninterrupted lineage from excavated pottery to present workshops.[3]

Scale is not the same as solidity

An IGNCA workshop account describes Tamil Nadu potters producing hollow fired figures and compares their work with practices represented by makers from other regions. That observation helps explain why an imposing figure should not be imagined as a solid block of clay. Construction is a problem of walls, joins and support, not simply one of adding more material. The workshop also provides a setting in which skill could be demonstrated in front of other practitioners. Such encounters matter because a finished sculpture can conceal the operations used to make it. The report records a particular event and selected artists, so it cannot establish one method for every district. Its strongest contribution is the direct attention it gives to making, including a structural characteristic that an external silhouette does not reveal.[6]

More than the familiar horse

The IGRMS Kumhar Para exhibition brochure places Tamil Nadu pottery within a broader range of objects. Alongside horses associated with Ayyanar, its entries include Aarasani vessels connected with weddings and Drishti Bommai figures associated with protective belief. The range prevents a single dramatic form from standing for all clay work. It also shows how object names carry information about use that a material label alone cannot provide. Belief should remain attributed to the communities and catalogue descriptions concerned; the brochure is not evidence that every household or village follows the same practice. A vessel used for a particular occasion, an offering and an object made for display may share clay while moving through different relationships of commissioning, ownership and meaning.[5]

The word “votive” is useful when it identifies an offering, but it should not make the surrounding people disappear. Questions about who requested an object, who made it, who paid for it and where it was placed are part of its material history. The horse’s posture, painted surface and arrangement beside other figures are visible features; the circumstances of a promise or commission may require a local account. A guide should not fill that gap with an invented village story. Where a community explains an association with protection or a fulfilled obligation, that explanation can be presented as testimony, with its place and speaker retained.

A nineteenth-century drawing is a dated witness

The British Library catalogues Philip Meadows Taylor’s drawing of terracotta horses at a temple in Coimbatore, dated 1834. The record establishes a specific historical observation rather than the beginning of the practice. Its accompanying account also preserves the observer’s limited understanding and dismissive judgement of the objects. That makes the archive doubly revealing: it records what attracted his notice, and it exposes the distance between an outside description and local meaning. The drawing’s date should not be turned into an age for the horses as a tradition. Nor should the observer’s valuation become a modern guide’s voice. The useful historical claim is narrower and firmer: these objects were being noticed and represented in that locality at that time.[4]

When the maker is named

IGNCA’s 2020 programme on Puducherry terracotta names V. K. Munusamy as a practitioner presenting the process and techniques of the craft. Horses, elephants and figures associated with Ayyanar appear in the programme’s account. Puducherry belongs here as a neighbouring cultural setting, not as a district of Tamil Nadu. Naming a practitioner also changes the emphasis of a general craft history. The figure ceases to be only an anonymous illustration of a region and becomes work that someone can discuss, demonstrate and develop. A programme notice confirms the planned subject and participant; it is not a transcript of everything said on the day. That distinction leaves the practitioner’s contribution visible without inventing personal recollections or treating an event listing as an interview.[7]

IGNCA’s 2014–15 annual report records the exhibition From Earth to Earth, devoted to terracotta offerings in Tamil Nadu and drawing on Julie Wayne’s photographs. It also records artisan demonstrations. The combination is instructive: photographs can preserve an arrangement of objects in a setting, while a demonstration shows a sequence of decisions that a still image leaves out. Neither needs to stand in for the other. Exhibition documentation is especially useful when it identifies photographers, practitioners and dates, rather than presenting a timeless view of “the village”. The report brings documentation and making into the same exhibition record.[8]

Training changes the available choices

The Centre for Social Development’s account of a 2002–04 pottery programme in Kanyakumari describes a training package that included clay preparation, casting and jiggering, moulds, equipment, kiln loading, decoration and trial production. It also describes product diversification and attention to commercial viability. Read as an organization’s account, this shows that craft support can address several connected stages, rather than merely introducing a new design. The distinction between an activity and its outcome remains important: providing training does not by itself establish durable income gains. Nevertheless, the named operations make the intervention concrete. They direct attention towards the practical knowledge required to move from a sample to a repeatable product, and towards the training opportunities through which that knowledge may be shared.[9]

Drying space, stock and delivery are part of the work

A pottery business plan published by the Tamil Nadu Rural Transformation Project sets out a production chain from sourcing and grading clay through mixing, moulding, drying, firing, sorting, painting, storage and marketing. Its proposed arrangements also consider packaging and damage in delivery. This is a plan, with assumptions, rather than a verified statement of current sales or profit. Its value for understanding craft is the attention it gives to work after shaping. Finished stock needs space, orders need coordination, and a piece that breaks before reaching its customer represents labour and material without a completed sale. Those concerns help explain why photographs of a potter at the wheel capture only part of a working enterprise. Production and distribution have to meet for the object to reach its intended use.[10]

Ancient pottery asks a different set of questions

The Heritage Science study by E. Odelli and colleagues examines pottery from Alagankulam and Keezhadi through archaeometric investigation. Its questions concern ceramic fabrics, production and movement, bringing analytical evidence to debates that cannot be settled by appearance alone. This is a different scale of enquiry from watching a present-day workshop. Modern observation can suggest how a shaping action works, but it cannot automatically identify the source of an ancient clay or the social identity of an excavated potter. Equally, a laboratory result on selected archaeological samples does not describe all contemporary Tamil Nadu terracotta. Keeping the two enquiries in conversation is productive; collapsing them into a single uninterrupted tradition would discard precisely the evidence needed to understand change.[11]

For a workshop visit or a collection label, a small amount of precise information goes a long way: the maker’s preferred name, place of production, date, material description, forming method and intended use. A commissioned horse deserves its local context; a newly designed bowl deserves recognition as a present choice. Ask before photographing people or entering a working or ritual space, and purchase newly made work through a maker or a source able to explain its origin. These practices support a record in which clay objects belong to living relationships and documented histories, rather than to a vague category of anonymous tradition.

Reading the evidence

Workshop observation
Arcot and Kanyakumari studies document different forming methods.
Field research
Konthagai findings concern the makers and period studied.
Historical record
An 1834 drawing supplies a dated observation, not an origin date.
Community interpretation
Protective and votive meanings are attributed beliefs, not universal claims.

Source notes distinguish documented making, collection records, practitioner accounts, oral traditions and scholarly interpretation. Editorial questions and recommendations are identified in the prose.

Sources and further reading

  1. [1] Terracotta Craft of Arcot: making processNID Bengaluru / Dsource · INSTITUTIONALBibhudutta Baral, B. Srikanth and Raghavendra Chari K. M.; workshop sequence, paddle/anvil finishing and open firing.
  2. [2] Pottery Making – Kanyakumari: making processNID Bengaluru / Dsource · INSTITUTIONALBibhudutta Baral and Sowmya B. N.; jiggering, plaster moulds and women’s training context. Chapters aggregated.
  3. [3] A Current Wisdom and Heritage of Making Terracotta Horses in Konthagai VillageS. Udayakumar / Heritage: Journal of Multidisciplinary Studies in Archaeology · ACADEMICVolume 10 (2022–23), published 2025, pp.129–147; field study. Findings bounded to documented makers/time, not a statewide census.
  4. [4] Terracotta horses at a temple at Coimbatore, WD120British Library · ARCHIVALCatalogue of Philip Meadows Taylor drawing dated 1834. A colonial observation, not evidence for the practice’s origin.
  5. [5] Kumhar Para: pottery exhibition brochure, September 2021Indira Gandhi Rashtriya Manav Sangrahalaya · INSTITUTIONALTamil Nadu entries include horses, Aarasani and Drishti Bommai. Beliefs described as community interpretations.
  6. [6] Tribal Art WorkshopIndira Gandhi National Centre for the Arts · INSTITUTIONALWorkshop account compares hollow Tamil Nadu figures with other represented making practices; avoid treating a demonstration as a census.
  7. [7] Terracotta traditions of Puducherry: lecture and demonstration concept note, 2020Indira Gandhi National Centre for the Arts · INSTITUTIONALProgramme naming V. K. Munusamy; Puducherry explicitly outside Tamil Nadu administrative geography.
  8. [8] Annual Report 2014–15: From Earth to EarthIndira Gandhi National Centre for the Arts · INSTITUTIONALTamil Nadu terracotta-offerings photography exhibition and artisan demonstrations, p.26. Distinct work from other IGNCA resources.
  9. [9] Science and Technology Package to Pottery TradeCentre for Social Development · COMMUNITYOrganization’s retrospective project account; training aims and activities not independent impact evaluation.
  10. [10] Pottery Business PlanTamil Nadu Rural Transformation Project · INSTITUTIONALPlanning assumptions and proposed marketing/production cycle are not actual current turnover or profit results.
  11. [11] Pottery production and trades in Tamil Nadu region: new insights from Alagankulam and Keeladi excavation sitesE. Odelli and colleagues / Heritage Science · ACADEMIC2020 archaeometric study; investigated samples and analytical provenance questions distinguished from modern ethnography.